Go to global navigation

Read the article

Go to local navigation

Go to footer



AF9201/01C


AF9201/ 01C In-Circuit Programmer

Features

Serial programming of various Flash microcontrollers, Serial and SPI Flash

AF9201

AF9201C

AF9201

AF9201C

The on-board programmer AF9201 and AF9201C are high-speed programmers that support board-mounted flash microcontrollers and SPI flash.

・Large capacity buffer memory

 · Buffer memory 1 Gbit (dedicated algorithm card)
 · Memory expansion is not required and main SPI flash can be supported
・Hardware design capable of high-speed writing to SPI flash
 · Supports single, dual, quad mode
 · High-speed writing that does not disturb the device capability value
・Serial programming of various Flash microcontrollers, Serial and SPI Flash
・Large capacity buffer memory

 · Buffer memory 1 Gbit (dedicated algorithm card)
 · Memory expansion is not required and main SPI flash can be supported
・Hardware design capable of high-speed writing to SPI flash
 · Supports single, dual, quad mode
 · High-speed writing that does not disturb the device capability value

■ Program time (including VERIFY) / 64 Mbit SPI Flash
Conventional machine 142 seconds
AF9201/AF9201C 35 seconds
*Communication speed: 3 MHz for conventional machine, AF 9201 50 MHz. Depends on device, environment
Easy to use interface
  • Equivalent function and operability as AF9101 / 03
  • Remote operation from USB connected PC can be separated, PC can be separated, continuous operation can be done with only single key.

External control interface (AF9201 only)
By using the dedicated external control interface, control operation by external trigger signal and result output to external are possible.
(System example)
 ・Online programming linked to FA devices such as sequencers and various controllers
 ・ Automatic control of data programming and function inspection just before assembly

Example for PC remote

Options

Dedicated algorithm card 1 type compatible : TECFM-1G-20
4 types compatible : TECFM-1G-20-4
* One unit of the programmer is provided with one dedicated algorithm card (TECFM-1G-20).
* Only one series can be registered to one algorithm card. Another algorithm card is required for additional device support.
Programming board for evaluation By connecting to AF9201, chip programming to SPI flash of SOP16 pin (300mil), SOP8 pin (200mil), SOP8 pin (150mil) is possible.
*It can also be used with AF9201C.
Power supply booster box High voltage and various control signals can be output for each device specification.

Programming board

Programming board for evaluation

Specification

AF9201
Buffer Memory Dedicated algorithm card standard 1 Gbit (128 Mbytes)
* Only one series can be registered with one algorithm card. A separate CF card is required for additional device support.
Concurrent programming 1 piece only
Support device Flash ROMs, Flash microcontrollers, Serial Flash ROMs of various manufacturers supporting SPI, UART, I2C, JTAG, SWD or CLK sync
Program power supply
  • TVCC1 = +1.5V ~ +5.0V (Icc = MAX 250mA)
  • TVCC2 = +1.5V ~ +5.0V (Icc = MAX 250mA)
External Interface
  • Target interface (JTAG, SWD, CLK synchronization, UART)
  • USB interface (USB 2.0)
  • Memory card interface
  • External control interface
  • Target interface (JTAG, SWD, CLK synchronization, UART)
  • USB interface (USB 2.0)
  • Memory card interface
Operating Voltages AC adapter AC 100 to 240 V
This instrument DC 7 V
Power frequency 50~60Hz
Power consumption Up to 3 VA
Size (D x W x H) 100 x 120 x 22 mm
Weight 210 g (excluding attached items)
Accessories ■ Standard accessories
Dedicated algorithm card, USB cable, target cable, External control interface cable, PC control software

■The master file name can be displayed on the control software and the main unit LCD display.
■ Standard accessories
Dedicated algorithm card, USB cable, target cable, PC control software

■The master file name cannot be displayed on the control software and the main unit LCD display.
Options
  • Dedicated algorithm card
  • Additional functions using a dedicated algorithm card (planned)
  • Programming board for evaluation
  • Power supply booster box
  • Dedicated algorithm card
  • Programming board for evaluation
  • Power supply booster box
Warranty 1 year